The good and the bad. Arrived today, Baader zoom MK4 eyepie

The place to discuss telescopes, binoculars, CCDs and other equipment

Moderators: joe, Brian, Guy Fennimore

skyhawk
Posts: 559
Joined: Tue Dec 05, 2017 11:53 am
Contact:

Re: The good and the bad. Arrived today, Baader zoom MK4 ey

Post by skyhawk »

David Frydman wrote:You did not state in your original post that you were using a 2 inch prism erector.

Your friends may laugh, but the ability to reach infinity depends on ones eyes dioptre correction, if needed.
And also the strength of any glasses used. I.e. distance glasses or reading glasses etc.
If the optical instrument doesn't have enough travel, infinity views may not be reached for all users eyes.

Binoculars have to be specially adapted by moving the objectives to allow, especially severely myopic users, to reach infinity.

Camera viewfinders need correction dioptres for different users eyes, either inbuilt or accessory dioptres.
The viewfinders are typically set at about minus 1 dioptre.


Regards,
David

I did show three diagonals ALL 2" so it was to be assumed that the other would be 2" also.......... sorry ...

"Binoculars have to be specially adapted by moving the objectives to allow, especially severely myopic users, to reach infinity.

Camera viewfinders need correction dioptres for different users eyes, either inbuilt or accessory dioptres"


Nothing that has anything to do with the product not being able to focus, this is the persons inability..................
Celestron 8" Edge HD Evolution, Esprit 120mm triplet, 72mm APO, Sky Tee 2, 6" reflecting scope, William Optics Binoviewer, Quark Daystar Ha Chromosphere on 72mm ED, LVW8mm eyepiece and Celestron 19mm Axiom, matched W.O 10 and 20mm, and a few others, D4s, D810,

For info, I am Autistic, Aspergers, ADHD, therefore if I come over as a little "short" on occasions it is not intended, thank you
Post Reply