Help me please

The place to discuss telescopes, binoculars, CCDs and other equipment

Moderators: joe, Brian, Guy Fennimore

Post Reply
MikeW
Posts: 1
Joined: Tue Aug 08, 2017 5:09 pm
Contact:

Help me please

Post by MikeW »

I have broken the front of my wife’s Meade lxd75 10” telescope
I am so struggling to find a replacement for her
Can people here advise on a superceding model or a telescope that is as good as and that can use the autostar mount and the eye pieces
I am so in the dog house :roll:
brian livesey
Posts: 5535
Joined: Mon Jan 09, 2006 11:05 am
Location: Lancashire
Contact:

Re: Help me please

Post by brian livesey »

Hi Mike, sorry to hear about the disaster. Which parts on the front of the 'scope are actually broken? Do you mean the focuser?
Could you attempt a repair job on the 'scope? It might be easier than you think.
brian
Brian
Posts: 3725
Joined: Fri Dec 03, 2004 9:58 pm
Location: Wellingborough
Contact:

Re: Help me please

Post by Brian »

Hello Mike.

I read into your post that your wife's telescope is a Meade 10inch Schmidt-Newtonian and that the part broken is likely as not the glass corrector plate at the top of the tube assembly?

If so then it will be a problem to get fixed as the design has not been produced for a number of years now. It might be possible to get hold of a second-hand tube assembly from sites such as UK-Astro-Buy-Sell or the classifieds here by placing a wanted ad. Other sites are also available :)

If that proves a problem, then your LX75 mounting will take arrange of other telescope tube assemblies if they are fitted with the correct dovetail. For instance other makes of 10inch diameter telescope tubes (eg. Newtonian, f4-f6 focal ratio) might well fit your existing tube-rings from the broken optical tube.

Just a few thoughts.

Regards,
Brian
52.3N 0.6W
Wellingborough UK.

254mm LX90 on Superwedge, WO ZS66SD, Helios 102mm f5 on EQ1, Hunter 11x80, Pentax 10x50
ASI120MC Toucam Pros 740k/840k/900nc mono, Pentax K110D
Ro-Ro roof shed
Post Reply