Limiting Magnitude

The place to discuss telescopes, binoculars, CCDs and other equipment

Moderators: joe, Brian, Guy Fennimore

Post Reply
chrispldexe
Posts: 47
Joined: Fri Apr 19, 2013 2:03 pm
Contact:

Limiting Magnitude

Post by chrispldexe »

I understand that the limiting magnitude from a clear dark sky site is 6.5.
I live in a city centre where the limiting magnitude is 3.5 if I, m lucky. I have read in astronomy guides that 10x50 Binoculars can reach down to magnitude 10.in ideal condtions.Similarly a 150 mm telescope can reach down to 13.6
Presumably frpm my light polluted site I can only get to magnitude 7 in binoculars or 10.6 in the 150 mm telescope.
Is this correct or am I completely wrong.

Chris
David Frydman
Posts: 5363
Joined: Mon Jan 18, 2010 9:25 am
Contact:

Re: Limiting Magnitude

Post by David Frydman »

Chris, you are correct.
However, with mag 3.5 maybe 3.0 unaided eyes, there are so few stars, you may have difficulty locating what you want.
A planisphere will help. Perhaps larger size.

The mag 13.6 with 150mm is with high magnification, say 120x or 150x so you need a very steady mount. A cheap mount will not go so faint.
So I would expect mag 10 with a 150mm scope where you live.
But again high magnification might let you get to mag 11, maybe fainter as high magnification darkens the sky background.
With the Pleiades you can go faint as you have fixed companions. In an empty sky, more difficult.

Also glimpsing is one magnitude fainter than holding the star continually.
Experience is important and averted vision.

Regards,
David
brian livesey
Posts: 5533
Joined: Mon Jan 09, 2006 11:05 am
Location: Lancashire
Contact:

Re: Limiting Magnitude

Post by brian livesey »

I'm on the edge of a small town Chris, but being on the edge offers no escape from light pollution; only occasionally is it possible to see stars below about mag 3 with the unaided eye. There are rare nights when the band of the Milky Way can be seen overhead, but not all the way down to the horizon.
These nights of improved clarity usually occur when water vapour and particulate pollution in the atmosphere are lower than usual. Most of the sky glare from light pollution is caused by light be reflected back to the ground and into our 'scopes from water droplets and sooty particles in the air. A night of good clarity indicates relatively clean atmospheric conditions.
brian
Post Reply